How to Reduce PFAS Chemicals in Drinking Water
by Dr. Jonathan Doyle - Updated November 23, 2021
The Wolf Administration was able to receive preliminary approval of a proposed
drinking water regulation that would set limits for two highly toxic chemicals. The Environmental Quality Board
approved the rule at 14 parts per trillion, and 18 ppm respectively in submissions from state agencies over this
summer.
The
state Department of Environmental Protection has found that one third of the 400+ sites tested across
Pennsylvania are contaminated with a harmful chemical. The federal government ordered public water systems in
2013 to conduct these screenings, and more than 100 communities have been tested so far for this substance. Both
chemicals belong to the group of perfluoroalkyl and polyfluoroalkyl substances, known collectively as PFAS, and
which are used in products like nonstick cookware, carpets, firefighting foam and fast-food wrappers.
What Are PFAS?
PFAS, which is short for Per- and Polyfluorinated
substances, is a group of human-made chemicals resistant to water, oil and heat. These chemicals have been
widely used in various industries and commercial applications since companies manufactured them by the
mid-twentieth century.
PFAS chemicals are commonly used in life and exist in products like water-resistant
clothing and shoes, non-stick cookware, stain-resistant carpeting, food packaging, polishes, paints, etc.
PFOA and PFOS
There are two PFAS that have been phased out of use due to their dangers: PFOA
(perfluorooctanoic acid) and PFOS (perfluorooctane sulfonic acid). These chemicals were traditionally used in
products such as nonstick kitchenware, cleaning products , stain repellants food packaging water resistant
clothing .
Today there is growing awareness about how dangerous these compounds can be when
they're released into our environment - this includes air pollution as well as exposure through drinking water
sources near industrial factories which produce them for example at home!
How Do PFAS Contaminate Water?
PFAS may find its way into the water in a number of ways. For instance, if you use
products containing PFAS or eat foods and drink water contaminated with these chemicals.
Residents of areas close to factories releasing PFAS chemicals as byproducts are
also at the risk of PFAS water contamination. The same goes for neighborhoods around airports, oil refineries,
and military bases. In these areas, the PFOA or PFOS used in fire foam contaminate the water via surface runoff.
But the big question is, is it possible to remove these chemicals completely from
the water supply before it gets to your home? Maybe not. According to 2016
research on PFAS, over 6 million Americans have their drinking water contaminated with PFAS levels
higher than the public health recommendations of the EPA.
How Can PFAS Affect People’s Health?
With characteristics that do not break down easily, the PFAS are known as the
“forever chemicals ” that would persist and accumulate in our environment, gradually go in and build up into
human bodies, causing potential risks to our health.
According to the EPA, exposure to certain
PFAS compounds can increase cholesterol, impact infant birth weights, affect our immune system, lead to diseases
like cancer, thyroid hormone disruption, etc.
How to Remove PFAS in Water?
Drinking water from PFAS contaminated water supplies is one of the most common ways
to get exposed to the chemicals.
Although the EPA and the states are taking actions to regulate and clean up PFAS
chemicals from the drinking water and the environment, it is a great challenge and may take years and even
decades of efforts to make progress.
How to protect ourselves from PFAS chemicals in drinking water?
Fortunately, many studies have shown that point-of-use filters with certain
technologies can also effectively remove PFAS, making it possible for people to remove PFAS from their home
water supply.
Activated Carbon Water Filter
Activated carbon treatment could work well for reducing PFAS in water. It is
commonly used to adsorb natural organic compounds, taste and odor compounds, and synthetic organic chemicals in
drinking water treatment systems.
If you check the water filter materials, you can easily find the activated carbon
in refrigerator filters, faucet-mounted
filters, pitcher filters, and other filtration systems. According to the studies
by Duke University and N.C. State University, the activated carbon filters could remove 73 percent of PFAS
contaminants on average.
Yet, they also found the activated-carbon filters’ effectiveness was inconsistent
and unpredictable as the test result for each test varies a lot. The activated carbon filter is only effective
in removing longer-chain PFAS but not the shorter-chain PFAS.
Reverse Osmosis Water Filter
High-pressure membranes like reverse osmosis use a partially permeable membrane to
separate ions, unwanted molecules and larger particles, considered the most effective technologies to reduce
PFAS in water.
Researchers from Duke University and N.C. State University tested 76 home water
filtration systems for their efficiency in reducing PFAS. The study found that reverse osmosis works the best
compared to other often used filter systems on the market, like refrigerator filter, pitcher style filter,
whole-house filter, etc.
The RO system could reduce GenX and other PFAS by 94 percent or more. The reverse
osmosis membranes contain pores of 0.0001 microns that are only big enough to allow the passage of water
molecules while blocking the PFAS and other contaminants.
Ion Exchange Treatment
The filter materials in this treatment are the small bead of resins. They attract
the PFAS chemicals present in water magnetically during the passage of the water. These beads are not soluble in
water, base, and acid because they consist of highly porous polymeric material. Therefore, treating your water
with the ion exchange method gets rid of most PFAS chemicals. However, it costs more than the GAC.
Will Boiling Water Remove PFAS?
No, boiling water alone won’t remove PFOS and PFOA, as there’s no evaporation &
condensation or filter process that could remove the chemical. In fact, boiling your water would just cause some
of the water particles to evaporate, resulting in the same concentration of PFAS within a smaller batch of
water.
Conclusion
There is still a long way to go for the final regulation and removal of those toxic
chemicals from our living environment and drinking water at a federal and states level. As a citizen, it is
important to know how to avoid getting exposed to those chemicals—— test your home drinking water regularly, and
take solutions to safeguard your home drinking water from these worrying toxic chemicals.
Contaminants Detected in Fruitland Water
Special
Service District
30
Contaminants
EXCEED EWG HEALTH GUIDELINES
EXCEED EWG HEALTH GUIDELINES
30 Total Contaminants in Your Water
Water Provider
Fruitland Water Special Service DistrictPopulation Affected
120,000Water Source
Ground waterExceeds Guidelines
Others Detected