Item model number
WD-N1-CF
Material
PP cotton and carbon block
Filter life
6 months
Dissatisfied with traditional under-sink RO filters?
Get clean, purified water anytime you want with the Waterdrop N1 Countertop Reverse Osmosis Water Filtration System!
How often should I change the filter?
How do I replace the CF replacement water filter for N1 countertop reverse osmosis system?
1.Remove the water tank cover. Hold the machine with one hand and remove the water tank with the other.
2.Open the system top cover, twist the CF filter 90° counterclockwise to unlock it, and take out the old filter.
3.Remove the wrappings and protective cap from the new filter.
4.Insert the new filter into its corresponding hole. Twist the filter 90° clockwise to lock it in place.
5.Close the system top cover. Replace the water tank after filling it with water, and then close the water tank cover.
6.Press and hold the CF filter life reset button for 5 seconds until the system beeps. The CF life indicator light will turn blue and later go out.
7.After resetting, it will flush automatically for 5 minutes. During the flushing process, the outer ring of the display screen will light up, showing a dynamic clockwise cycle.
8.After 5 minutes, the machine will stop flushing and display L1 to remind you to change the water in the feed water tank. Take out the water tank, pour out the concentrated water, and add water again.
Now you can use the machine normally.