Waterdrop G3P600 RO system | Waterdrop G3 RO system | Traditional RO system | |
---|---|---|---|
Tankless design | ✔ | ✔ | ✖ |
Flow rate | 600GPD | 400GPD | 50-100GPD |
Smart leakage protector | ✔ | ✔ | ✖ |
3s filter change time | ✔ | ✔ | ✖ |
Pure to drain | 2 : 1 | 1 : 1 | 1 : 3 |
Real-time Water Quality Display | ✔ | ✔ | ✖ |
Hear it Straight From Our Pros and Users
Model number
WD-G3P600
Certification
NSF/ANSI 58 & 372
Pure to drain
2:1
Materials
System cover: BPA-free plastic
Faucet: smart display faucet
RO filter: reverse osmosis membrane
CB filter: carbon block
CF filter: PP cotton & carbon block
Power cord length
90 inches
Product dimensions
18.11 x 5.67 x 17.73 inches
Item weight
32.4 pounds
Included components
System cover, Smart screen faucet, RO filter, CF filter, CB filter, PE pipes *3 ( 60" ), T-fitting, drain saddle, lock clips, power adapter (Main power cable 90", faucet's power cable 59")
Faucet
Smart Screen Faucet
Flow rate
0.42 gallon per minute (GPM), 600 gallons per day (GPD)
Indoor or outdoor use
Indoor use only
Wall plug
Yes
Usage conditions
Ice machines, Faucets, Aquariums, RVs
An electrical outlet is required to operate the RO system.
Reduction substances
TDS, chlorine, taste and odor, chloramine, scale, turbidity
Carcinogens: chromium (hexavalent), chromium (trivalent), cadmium and cadmium compounds, ferric oxide
Heavy metals: lead, mercury, barium, copper, radium 226/228, aluminum
Microorganic contaminant: cyst
Inorganic pollutants: arsenic and inorganic arsenic compounds, fluoride
Organic pollutants: asbestos, benzene, formaldehyde, nitrite bisphenol A, trichloromethane, chlordane, PFOA & PFOS, and more
What is the difference between Waterdrop and traditional RO systems?
What is the pure to drain ratio?
The pure to drain ratio is 2:1, therefore, for every 2 cups of pure water
you get, only 1 cup of wastewater is produced, which is much higher than the traditional RO systems.
What is new about the Waterdrop G3P600 Ro water filter system?
The RO system offers faster water flow (600 gallons per day) and can
filter a cup of water in about 8 seconds. Compared to traditional RO systems, the Waterdrop RO System
has a low drain ratio of 2:1. Save more money on your water bills!
What is reverse osmosis water systems?
Reverse osmosis (RO) is a water purification process that uses a partially
permeable membrane to filter out impurities from drinking water. In reverse osmosis, an applied pressure
is used to overcome osmotic pressure, a colligative property that is driven by chemical potential
differences of the solvent, a thermodynamic parameter. The result is that the solute is retained on the
pressurized side of the membrane and the pure water is allowed to pass to the other side. To be
"selective", this membrane should not allow large molecules or ions through the pores, but should allow
filtered clean water to pass freely.
How does a reverse osmosis system work?
A reverse osmosis system reduces sediment and chlorine from water with a
prefilter before it forces water through a semipermeable membrane to reduce dissolved solids. After
water exits the RO membrane, it passes through a postfilter to filter the drinking water before it
enters a faucet.
Does the reverse osmosis water filtration system produce wastewater?
All RO systems will produce concentrated water to discharge impurities.
Compared to traditional RO water purifiers, Waterdrop RO system produces less concentrated water and
saves 300% more water. You can collect concentrated water to mop the floor, wash your car, do laundry,
etc.
What contaminants can Waterdrop reverse osmosis water filter system remove?
Waterdrop reverse osmosis water filter system adopts advanced composite
filter technology. Uses the characteristics of various filter materials skillfully and combines them to
achieve better filtration. The composite filter can intercept most harmful contaminant.
• TDS, chlorine, taste and odor, chloramine, scale, turbidity.
• Carcinogens: chromium (hexavalent), chromium (trivalent), cadmium and
cadmium compounds, ferric oxide.
• Heavy metals: lead, mercury, barium, copper, radium 226/228, aluminum.
• Microorganic contaminants: cysts.
• Inorganic pollutants: arsenic and inorganic arsenic compounds, fluoride.
• Organic pollutants: asbestos, benzene, formaldehyde, trichloromethane,
chlordane, PFOA & PFOS, etc.
Does Waterdrop reverse osmosis water filter system need power?
The RO system has a pump that will need power to maintain a fast water
flow rate.
How to install reverse osmosis system?
Waterdrop RO systems are designed for DIY installation. You can install
the system in 30 minutes. Simply refer to the instruction manual and instructional videos, or contact us
by email, phone, or live chat.
This video explains how to install Waterdrop RO system.
How often do I need to change the RO filter?
G3: The CF filter has a 6-month lifetime; the CB filter has a 1-year
lifetime; the RO filter has a 2-year lifetime. Waterdrop G3 Reverse Osmosis System has a smart faucet
and filter life indicators that will remind you to replace the filter.
Does the reverse osmosis system make a loud sound?
The sound will not exceed 65 dB, which is a comfortable level for everyday
life (65 dB is tested under standard laboratory conditions, where the feed water pressure is between
14.5 psi and 87 psi). A loud sound may be caused by the following:
a. The system is not positioned in a flat area. Make sure the system is
placed smoothly without shaking.
b. The system is placed against the cabinet. Do not place the system
against the cabinet. The system may vibrate when it works.
c. The water pressure is unstable. Check and confirm the water pressure is
between 14.5 psi and 87 psi. The sound will decrease when the water pressure becomes stable.
When you change filters, do you need to turn the water off?
The water source and power supply are not required to be cut off when the
filters need to be replaced. The replacements can be directly screwed and reinstalled. RO system can be
normally used after resetting and the flushing process are finished.
Does the RO system remove coliform and other parasites?
Our RO system uses reverse osmosis filtration technology with a filtration
accuracy of 0.0001um, and the system can effectively reduce most contaminants, including coliform and
other parasites.
Does this system eliminate or remove Atrazine?
As a benefit of the RO membrane (filtration accuracy: 0.0001μm), this
system is able to reduce the atrazine from the source water. In addition, the composite filters of G3
can also reduce chlorine, fluoride, heavy metals and provide you with fresh and tasty water.
Does this RO water system remove arsenic?
As a benefit of the RO membrane (filtration accuracy: 0.0001μm), this
product is able to reduce the arsenic efficiently from the source water. The membrane has microscopic
pores that are specially sized to allow water molecules through, while trapping larger inorganic
molecules like lead, iron, chromium and arsenic.
Is this reverse osmosis water filter system unit suitable for well water?
We do not recommend using well water as source for our RO systems.
The reasons are as follows:
1. Large particles.
Compared to municipal tap water, the well water is rich of large particles, which will clog the filters easily, and shorten their lifetime significantly.Please note that the filters will still need to be replaced more frequently, even if you have added a pre-filtration system.
2. Composition
The well water has very complicated compostion, and some of them (apart from the large particles) can cause the filter or internal valve to be clogged and prevent the RO system from normal performance.
3. Water pressure
The well water may not provide the feed water pressure that the RO system requires (14.5 psi min.). Furthermore, the water pressure will be even lower after passing through pre-filtration systems.
The reasons are as follows:
1. Large particles.
Compared to municipal tap water, the well water is rich of large particles, which will clog the filters easily, and shorten their lifetime significantly.Please note that the filters will still need to be replaced more frequently, even if you have added a pre-filtration system.
2. Composition
The well water has very complicated compostion, and some of them (apart from the large particles) can cause the filter or internal valve to be clogged and prevent the RO system from normal performance.
3. Water pressure
The well water may not provide the feed water pressure that the RO system requires (14.5 psi min.). Furthermore, the water pressure will be even lower after passing through pre-filtration systems.
Do you need to have an electrical outlet under your sink for this work?
As a standard appliance, this product will need to be plugged into one
electrical outlet to function normally.
Does this RO system need a drain piping nearby for discharge?
Yes, this model does need a drainpipe nearby, for discharging the waste
water. For that, we provide an adjustable drain saddle to connect the RO's waste water tubing to your
drainpipe.
What is the amount of space required between the RO unit and the cabinet?
In order to avoid the vibration which can affect the use experience,
please ensure that there is an about 1-inch gap between the RO system and the cabinet. The size of the
RO Filtration system is 18.11 "* 5.67" * 17.72 ", without a storage tank. It's very thin and takes up
very little space.
Has this RO water system been NSF certified yet?
Waterdrop G3P600 reverse osmosis system is certified against NSF/ANSI 58
for TDS reduction and NSF/ANSI 372 certified for lead-free material. See WD-G3P600 RO system test
results for more.
Is the water line hose 1/4" or 3/8"?
Inlet tubing: 3/8", Outlet tubing (connect with RO faucet): 1/4", Feed
water adapter: compatible with 3/8" and 1/2" water line.
Can I buy the accessory kit so that I can hook up my fridge all at once?
Yes, the instruction manual explains how to connect the Waterdrop to your
fridge using parts purchased from a hardware store. The output from the Waterdrop to the faucet is 1/4”
tubing. If your fridge has a 1/4” input, all you need is a 1/4” quick-connect T-adapter and the tubing
that you’ll run to your refrigerator - you can find these online or at your local hardware store. If
your refrigerator is like mine, the input is 3/8”, so I had to add an additional 1/4” to 3/8” adapter to
the line leading from the T-adapter to the fridge. It doesn’t affect the performance of the Waterdrop at
all.
Is this reverse osmosis water system BPA free?
Please note that our RO system is BPA free.
Does this reduce or remove the salt in the water from my water softener?
Although with filtration accuracy of 0.0001 μm, this model can reduce
Calcium ion 90% of the salt from the water, the remaining salt added by the water softener may still
affect the water taste. Therefore, we don't recommend placing the RO system after a salt-based water
softener, since the taste will be affected.
What is the minimum water pressure to operate this unit?
The rated water inlet pressure of the machine is 14.5-87psi. It can work
properly within this range.
What size hole would I need to drill to install the faucet in my sink?
It's recommended to drill a hole of 1". If there's a reserved hole for the
soap dispenser on your countertop, you could use that to install the RO faucet directly. In addition, we
have included a sticker in the package, which could be used as a reference while drilling the hole.
How often do you need to replace the reverse osmosis filters?
The life of the filter element of our machine depends on the two indexes
of service time and pure water after filtration. As long as one of them reaches the upper limit, it
needs to be replaced. The first stage front compound filter element is recommended to last for 6 months
or to filter 550 gallons of pure water. The second stage RO element is recommended to last 24 months or
to filter 2200 gallons of pure water. The third stage rear carbon rod filter is recommended to last 12
months or to filter 1,100 gallons of pure water. Due to the different water quality and water
consumption of each house, the actual replacement time of the filter element is not consistent. The
actual use situation shall prevail. When the filter element needs to be replaced, the prompt light on
the machine and the lamp ring of the faucet will prompt through the color change. You can replace it
according to the prompt, which is very convenient.
Can the system be connected with a UV water sterilizer?
Yes, it can be connected with a UV water sterilizer, and it requires an
extra power plug (the UV water sterilizer requires extra power).
How often do you have to change the membrane?
The RO membrane filter needs to be changed every 24 months or 2200
gallons.
Can the system be connected to the refrigerator so the ice is filter as well?
Generally speaking, the RO system can be connected to your refrigerator.
After completing the registration online, you could choose the accessory kit, which will help you
connect the RO to your refrigerator/ice maker. Since different refrigerator/ice maker has various
requirement of water pressure, it's not possible for our RO system to provide them all. Connection under
mismatched circumstance may result in many problems, including but not limited to: slow ice making,
frequent start-stop issue, etc. Therefore, it's NOT recommended to connect the RO system to your
refrigerator/ice maker.
Does this reverse osmosis water system prevent bacteria from growing in the filter?
Please rest assured that the RO membrane (filtration accuracy 0.0001 μm)
can effectively reduce bacteria and virus whose diameter are greater than 0.0001 μm from the source
water.
What is the waste water to filtered water ratio?
The waste to filtered water ratio is 1:1, which is much higher than the
traditional RO systems.
Can I use our own faucet?
Truly sorry, the brushed nickel faucet is the only option available
now.
You could use your own RO faucet with our product, but not normal faucet for tap water.
There are a few things you may need to know before purchasing one:
Firstly, our faucet is equipped with a filter life indicator, which allows you to monitor the filters' life easily. If you decide not to use our original faucet, this function will not be in effect.
Secondly, your RO faucet should be able to connect with the outlet tubing of the system, which has a diameter of 1/4".
In addition, it should have a "Quick-Connect Fitting", please click here.
OR, it should come with a set of accessory parts, which allows you to connect the faucet with the bare end of our outlet tubing. Please click here to see the example for your reference.
If the faucet does not meet one of these requirements, you will need to acquire a corresponding adapter, in order to complete the connection with the machine.
You could use your own RO faucet with our product, but not normal faucet for tap water.
There are a few things you may need to know before purchasing one:
Firstly, our faucet is equipped with a filter life indicator, which allows you to monitor the filters' life easily. If you decide not to use our original faucet, this function will not be in effect.
Secondly, your RO faucet should be able to connect with the outlet tubing of the system, which has a diameter of 1/4".
In addition, it should have a "Quick-Connect Fitting", please click here.
OR, it should come with a set of accessory parts, which allows you to connect the faucet with the bare end of our outlet tubing. Please click here to see the example for your reference.
If the faucet does not meet one of these requirements, you will need to acquire a corresponding adapter, in order to complete the connection with the machine.
What does Pure to Drain Rate mean?
The reverse osmosis water filter relies on a semi-permeable membrane to
filter out impurities from drinking water. When the tap water is compressed through the RO membrane, it
produced pure water and waste water. The ratio of pure water to waste water is called wastewater ratio.
1:1 wastewater ratio means 1 gallon water is wasted per 1 gallon purified, and 2:1 wastewater ratio
means 1 gallon water is wasted per 2 gallon purified. The higher the wastewater ratio is, the less
waster water produced during the filtration process. During the use of RO water filter, the actual ratio
might be lower than the labeled, depending on many factors such as water quality, pH, pressure and
temperature.
Is the G3P600 RO replacement filter suitable for the G3 RO system?
We do not recommend using the G3P600 RO replacement filter for the G3 RO
system. Using an impropriate filter will affect the performance of the machine itself.
Could my old G3 be upgraded to the new model G3P600 for free?
We do not support exchanging old machines for new ones now. You can
contact us to get more help.
+1-888-352-3558
service@waterdropfilter.com
+1-888-352-3558
service@waterdropfilter.com
How to choose products
Get an additional 5% savings!
STEP 1
- Choose G3P600 Undersink Reverse Osmosis System
STEP 2
- Select your favourite Countertop Water Filter and enjoy an extra 5% discount!
STEP 3
- Pick your Outdoor Water Purifier for an additional 5% savings!
G3P600 Under sink Reverse Osmosis System
- 8-stage Deep Filtration
- NSF/ANSI 58 & 372 certified
- 600GPD faster water flow fill up a cup in 8s
2.25-gallon King Tank Gravity Water Filter System With Stand
- In-depth drawing technique
- Effectively reduces chlorine and improves taste
- Effectively filter up to 6,000 gallons of water
Waterdrop Electric Water Filter Countertop Water Filtration
System
- Reduces 30+ impurities
- Instant, powerful water filtration
- Faster, fresher drinking water at home or outdoors
Alkaline Countertop Electric Water Filter Pitcher
- Offer a healthier hydration choice
- Raising water’s pH
- Providing filtered water with one-touch control
Waterdrop Spotless Car Wash System
- Enjoy Spot-Free & Hassle-Free Car Washing At Home
- Protect the Paintwork of Cars
- Lower Cost, Higher Efficiency